Pure Water Specialists Online Since 1999

Water Factory N4500 4 Stage Reverse Osmosis System

Water Factory N4500 4 Stage Reverse Osmosis System

3M CUNO Water Factory N4500-TFC 4 Stage RO Reverse Osmosis Compatible Premium Replacement Water Filters, RO Reverse Osmosis Membranes, DIY Service Parts and HELP Guides.

Replacement water faucets, accumulator holding water tanks, water filter cartridges, pre filters, post filters, sediment filters, carbon block filters, GAC filters, RO membranes, O-rings, Filter Housing Spanner Wrenches, Valves, Water Pumps and reverse osmosis drinking water system replacement parts.  Be sure to have a TDS tester to check the performance of your RO Reverse Osmosis membrane as listed below.


CUNO Water Factory N4500-TFC   4 Stage Reverse Osmosis System

• Ideal for municipal or well supplied water.
• String wound and carbon cellulose prefilters provide sediment and chlorine reduction, extending membrane life.
• RO membrane reduces arsenic, copper and other metals, lead, turbidity and other contaminants. 
• In-line carbon post filter provides a final water "polish".
• Temperature: 40° -1 20° F (4.4° - 48.9° C).
• Pressure: 20 - 90 PSI (0.13 - 0.6k Pa)

CUNO Water Factory N4500 TFC Reverse Osmosis Drinking Water System Owner's Manual

 

3M CUNO WATER FACTORY N4500-TFC 4 STAGE RO REVERSE OSMOSIS COMPATIBLE PREMIUM REPLACEMENT WATER FILTERS AND RO REVERSE OSMOSIS MEMBRANES

NOTE-Membrane housing must be replaced.  OEM housing will not open to accept a new RO membrane. You will also need to order the matching flow restrictor and check valve below.  Remove and discard the old red SFC "Stealth Flow Control"  from the drain line and replace with new tubing)

Order the following repalcements for your Water Factory N4500-TFC RO system:

  1. AquaPure AP110 by 3M Purification ® Fine / Normal Sediment Water Filters - 55410-14 - 2 Pack - 5 Micron Nominal
    AquaPure AP110 by 3M Purification ® Fine / Normal Sediment Water Filters - 55410-14 - 2 Pack - 5 Micron Nominal

    Aqua-Pure AP110 2-Pack by 3M Purification ® For Premium Performance Filtration - aka AquaPure or Aqua Pure. 5 micron nominal. Product dimensions: 2.5” diameter by 9.8” length - This Aqua-Pure dirt & rust cartridge is made from an exclusive process using pure white celluose fibers. Reduces sediment Average life: 6 months (incoming water quality may affect cartridge life) Proprietary polypropylene manufacturing process Grooved surface increases total surface area for longer cartridge life than non-grooved filter cartridges Rigid construction helps to eliminate sediment “unloading” due to variances in water pressure System materials are FDA CFR-21 compliant

    Learn More
    $37.99 Special Price $29.99 As low as $25.49
  2. Flow_Restrictor-500  Flow Restrictor - capillary - 500 ml  1/4' quick connect fit-1000
    Flow Restrictor - Inline - 500 ml 1/4' quick connect fit...

    Flow Restrictor - capillary - 500 ml 1/4" quick connect fittings. 

    Premium inline reverse osmosis membrane flow restrictor - Our in-line capillary flow restrictors are simple to install. Simply push the 1/4" poly tube firmly into the quick connectors and you are done. Be sure that you order the flow restrictor size to match your reverse osmosis membrane size. Arrow on side points toward the drain. Very simple to install.

    Learn More
    $24.99 Special Price $19.99 As low as $16.99
  3. AquaPure 68900-34 Adjustable Strap Wrench For Water Filter Housings
    AquaPure 68900-34 Adjustable Strap Wrench For Water Filter Housings
    AquaPure 68900-34 Adjustable Strap Wrench For Water Filter Housings - Universal Strap Wrench; Works with Most Water Filter Housings. AquaPure 68900-34 Adjustable Strap Wrench: Use for twisting off the canister or sump on many water filter housings. The Adjustable Strap Wrench can be used with many water filtration housings. The strap adjusts to the size of the water filter housing. Do NOT use the AquaPure 68900-34 Adjustable Strap Wrench to tighten the water filter housing sump. Overtightening the sump can cause damage to the o-rings and make re-opening the housing sump difficult. You should only hand tighten the housing sump. The AquaPure 68900-34 Adjustable Strap Wrench makes replacing water filters easy.
    Learn More
    $12.99 Special Price $8.99 As low as $7.49
  4. Molykote-From DOw Corning- 111 Compound-6 Gram O-ring Silicone Lubricant & Sealant-Dow-111-5-gram-1000
    Dow Corning - Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - Be sure to lube your O-rings to help prevent leaks.
    Dow Corning/ Molykote ® 111 6 gram O-ring Silicone Lubricant and Sealant - 6 gram pillow pack. (like a ketchup packet) Great O-ring sealant and lubricant. FDA and NSF approved. (Do Not Use Petroleum Jelly As It May Break Down O-rings Or Housings) This is the same premium grade silicone sealant and lubricant used in underwater photography cameras, scuba gear and other underwater applications that simply can't afford leaks. Why not use the best for your reverse osmosis or drinking water filtration system?
    Learn More
    $5.99 Special Price $3.99 As low as $1.79
  5. Pro Products Sani System RO & Water Filtration System Sanitizer
    Pro Products Sani System RO & Water Filtration System Sanitizer
    Sani-System ® Pro Products is proud to introduce Sani-System, the first and only EPA product approved for sanitizing water softeners, RO units and Water Coolers. Alos NSF certified. Sani System is proven to kill 99.9% of E. coli, E. coli O157:H7, Staphylococcus aureus, Listeria monocytogenes and other harmful bacteria. It does not use chlorine, other oxidizers or acids that can harm water softener equipment parts. Use is simple; each dose comes in a pre-measured pouch. Just cut, pour and regenerate softener. No measuring, No mess! Sanitizing Equipment! Applications Interior Surfaces of Water Softeners, Reverse Osmosis (RO) Units, Ice Machines, Water Coolers, Water Holding Tanks and Pressure Tanks. Pro Products Sani System Sanitizer. 0.25 fl. oz. concentrate is perfect for your RO reverse osmosis drinking water system sanitizing..
    Learn More
    $7.99 Special Price $4.99 As low as $2.99
  6. Stainless Steel Designer Faucet for RO Reverse Osmosis & Drinking Water Filtration Systems
    Stainless Steel Designer Faucet for RO Reverse Osmosis & Drinking Water Filtration Systems
    Stainless Steel Designer Faucet for Drinking Water Systems. Beautiful designer faucet for beautiful kitchens. Air Gap / Non Air Gap design, single or three tube connection. Made of high quality 304 stainless steel incorporating a smooth operating ceramic disk element for extended reliability and quality. Great replacement upgrade for RO Reverse Osmosis and drinking water filtration systems. Lever Style Handle. High Reach Neck Design (12" / 305mm) 360 Degree Swivel Neck. Unique Protective Spout Tip which Prevents After Drip. 2 1/4" Base Diameter (57 mm) Drilled Hole Size Needed is 7/8".
    Learn More
    $219.99 Special Price $99.99
  7. Air Pressure Gauge for Reverse Osmosis Water Accumulator Tanks -1000
    Air pressure gauge for reverse osmosis water accumulator tanks
    Air pressure gauge for reverse osmosis water accumulator tanks - Specially calibrated for reverse osmosis system tanks. Scale from 1 to 20 PSI. Large scale reading over small PSI range allows optimum accuracy. Just like car tires lose air pressure, so does the bladder of your reverse osmosis water accumulator tank. Improper tank air pressure will cause your system to operate improperly. This is a must for all reverse osmosis system owners.
    Learn More
    $24.99 Special Price $17.99 As low as $12.99
  8. TDS Meter Inline Water Tester DM1 - HM Digital Dual Mode Reading
    TDS Meter Inline Water Tester DM1 - HM Digital Dual Mode Reading - Easily Installs Inline Very Simple To Use
    TDS Water Meter - HM Digital DM1 - Dual Mode - Installs Inline - Check the TDS level with the push of a button. Now you can easily check to make sure the water from your reverse osmosis system is top quality. Measure the tap water coming in vs. the purified water going out of your system at any time. Very easy installation. Highly efficient and accurate due to its advanced microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use. Dual Range 0-9990 ppm. Always know if your RO membrane is performing correctly!
    Learn More
    $49.99 Special Price $39.99 As low as $19.99
  9. TDS Water Meter Dual Mode Readings - DM2 HM Digital Professional Grade
    TDS Water Meter Dual Mode Readings - DM2 HM Digital Professional Grade - Easily Installs Inline - Very Simple To Use
    TDS Meter Dual Mode Readings - Professional Grade - Easily Installs Inline - Very Simple To Use. Measure the tap water coming in vs. the purified water going out of your system at any time. Use the meter to determine when the filters need to be changed. Highly efficient and accurate due to its advanced microprocessor technology. Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. Dual Range - Measures from 0-999 ppm, with a resolution of 1 ppm.
    Learn More
    $69.99 Special Price $49.99 As low as $29.99
  10. John Guest Super Speedfit Quick Connector - Male - Elbow
    John Guest ® Super Speedfit Quick Connector - Male - Elbow
    John Guest ® Super Speedfit Quick Connector - Male - Elbow - John Guest Super Speedfit Quick Connectors - Male - MNPT - Sold in pairs. Price is per pair. These fittings are manufactured in gray acetal copolymer with food grade nitrile ‘o’ ring, making them especially suitable for applications involving foodstuff and potable liquids like reverse osmosis drinking water. They are equally suitable for air and inert gasses and can therefore be used on CO2 lines, pneumatic applications, and vacuum. For more than a decade, John Guest has been supplying Super Speedfit fittings to the Water Purification market for drinking water applications in homes, restaurants and industry. John Guest products are listed with the WRC(UK), NSF(US) and SK(Germany). PI480821S , PI480822S , PI480823S , PI481222S , PI481223S
    Learn More
    $8.99 Special Price $4.99 As low as $3.99
  11. Easy Tap Water Feed Valve for Water Filter Systems - 2000
    Easy Tap Water Feed Valve For Water Filter Systems 3/8" Feed Tube

    Easy Tap Water Feed Valve For Systems With 3/8" Feed Tube - High flow tap valve. Follow the pipe up from the shut-off valve toward faucet until you reach a coupling nut (may be all the way up to the faucet). Unscrew coupling nut. Screw brass easy tap onto previous location of coupling nut. Hand tighten and then one more complete turn with wrench. Re-attach water line coupling nut to easy tap. The valve on the side of the easy tap is the shut off valve for your new RO system. If the handle is turned clockwise all of the way, this is the "OFF" position for your new RO system. Counterclockwise all of the way is the "ON" position.

    Learn More
    $16.99 Special Price $8.99 As low as $4.99
  12. Chiller Daddy CHL-750XL Under Sink Water Chiller - 110 Volt
    Chiller Daddy CHL-750XL Under Sink Water Chiller - 110 Volt

    110 Volt Chiller Daddy ® CHL-750XL Under Sink Water Chiller -  NEW TANK IS 25% LARGER than our previous chillers.  Output Cold Tank Volume : 3 liter (0.8 gallon) Exterior cabinet is made of RUST FREE 304 SS Stainless Steel. Cold Water Container is made of SUS304 Stainless Steel. Inlets and outlets are 1/4" stainless steel 304. Includes a pair of quick connectors for a simple hook up. Output of Cold Water : 1.75 Gallons Per Hour (6.6 Liters 5L/H (<10C) Continuous Cold Water Output(cc/hr). This is a high output, heavy duty undersink drinking water chiller. Great for use with a Reverse Osmosis System or drinking water filter system.

    Learn More
    $499.99 Special Price $395.00 As low as $354.00
  13. 4 Stage Reverse Osmosis RO Pure Drinking Water System
    4 Stage Reverse Osmosis RO Pure Drinking Water System

    4 Stage Reverse Osmosis RO Pure Water System With Auto Shut Off Valve

    50 Gallon Per Day Filmtec TFC Reverse Osmosis Membrane (Higher capacity and faster recovery time) 50 GPD FILMTEC TFC Reverse Osmosis Membrane, KX Carbon Block & Osmonics Sediment Pre Filter, Omnipure GAC Post Filter. Uses Standard Size Replacement Filters. Includes New 4 Gallon Storage Tank (14 " high X 11 " diameter) , Long Reach CA Lead Safe Faucet & Installation Kit. System measures: 17" High X 14" Wide X 6" Deep

    Learn More
    $279.99 Special Price $210.00 As low as $185.00

 



Easy TDS Membrane Performance Calculator
See If It is Time To Replace Your Membrane

Simply enter your Feed Water TDS and RO Water TDS into the boxes above and click "Submit". The percentage of TDS Rejection will be displayed. We normally recommend membrane replacement once you drop below 75%. This may vary in areas with high TDS in the feed water.

See our selection of TDS meters under Water Tests


Be sure to check our Parts Department for important parts such as TDS Testers For Reverse Osmosis Membranes, Replacement Tanks, O-rings , Filter Housing Wrenches, Faucets, Pumps, Fittings, UV Systems and more parts for your reverse osmosis pure water filtration system.   View maintenance and servicing tips online at our Installation & Trouble shooting Guide.








* WATER FACTORY ® IS THE REGISTERED TRADEMARK OF 3M FILTRATION, THE MANUFACTURER OF WATER FACTORY ® BRAND WATER TREATMENT EQUIPMENT. THE REPLACEMENT FILTERS AND MEMBRANES LISTED ABOVE ARE MANUFACTURED BY 3M WATER FACTORY AS SO NOTED. WATER FACTORY REVERSE OSMOSIS DRINKING WATER SYSTEMS WERE ALSO MANUFACTURED AND SOLD UNDER THE CUNO BRAND NAME. WE ALSO OFFER COMPATIBLE REPLACEMENT SEDIMENT WATER FILTERS, REPLACEMENT CARBON BLOCK WATER FILTERS, GAC CARBON FILTERS, INLINE POST FILTERS, RO REVERSE OSMOSIS MEMBRANES, PRE FILTERS, FAUCETS, WATER TANKS, VALVES, PUMPS, UV ULTRAVIOLET AND WATER TESTING SUPPLIES FROM VARIOUS OTHER MANUFACTURERS FOR DISCONTINUED CUNO WATER FACTORY DRINKING WATER SYSTEMS.